Khóa thẻ từ-Saflok ädse™

Description

Electronic mortise lockset with 1” (25.4mm) throw deadbolt and 5/8” (15.9mm) dead-locking latch  bolt

Handing

Factory-handed mortise (left, right, left reverse, right reverse)

Deadbolt

1
” (25.4mm) throw deadbolt and 5/8” (15.9mm) dead-locking latch  bolt

Door Thickness

1 ¾” (44.5mm) to 2 ⅛” (53.98mm) for standard product

Weight

Approx. 8.0 lbs with hardware

Housing
Construction

Escutcheons: Zinc 
Levers:  Brass,  zinc, or stainless steel

Standard Finishes

Bright chrome, bright brass, satin chrome, satin brass, dark mahogany

Inside Trim Options

Optional  äd  se or MT inside  escutcheon

Standard Backset

2 ¾” (69.9mm) from door  edge to lever

 Locking Options

ANSI lock case with 1 ½” or 1” lock front mortise
Options: automatic deadbolt, door ajar, MKO
European lock case mortise (20 x 165 mm) with 20 x 233 mm lock front mortise

 Online
Configurations

Messenger Ready                DAJ mortise (ANSI lock case)
                                         Standard (stand alone)  inside escutcheon

Messenger Online                Lock controller board with Messenger capability
                                         DAJ mortise (ANSI lock case)
                                         Inside escutcheon equipped with Messenger module

Batteries:

 Alkaline - Four  AA battery pack

Battery life is up to 2 years
Low battery indicator: alerts staff that batteries need to be changed soon 

Lock Operation:

Date/Time Stamp

Real-time; date and hours/minutes

 Interrogation

Obtain key usage reports from the lock by using a handheld unit at the door, or increase efficiency by performing a remote Interrogation using Messenger (optional)

Pre-registered Keycards

Keys can be made up to ten days  in advance without cancelling current or arriving guests

 Keycard Expiration

Configurable expiration dates; can be automatically set for check out date or manually applied when making  key during  check  in process.

 Passage  Mode

Set by authorized keycard or Messenger system.  Can also be configured to perform an automated /pre-defined passage mode time.

Lockout Mode

Set by authorized keycard or Messenger system

Keycards Accepted

Magstripe, smartcard or Mifare Classic (Quantum RFID and QuantumII) keycards (4 byte  HUID)

Feedback

Light indicators in reader

Diagnostics

Light indicators and handheld display

Audit Trail

Up to 4,000 events

Disability Feature

RCU readers interface with automatic power  operated doors for special openings

Privacy Override

Emergency keycards

Certifications and  Testing:

  Accessibility Standard

ADA compliant levers (Code of Federal Regulations 28 CFR Part 36 – 1994 “ADA Standards for Accessible Design”)

BHMA/ANSI

Certified to be compliant with Grade  One performance tests for “ANSI/BHMA A156.13-2005  Standard for Mortise  Locks and Latches,” and “ANSI/BHMA A156.25-2007 Standard for Electrified Locking Devices.”  (Only locks tested and approved by non-biased third-party test lab are  allowed  in the  “BHMA Certified Products Directory” found  at www.buildershardware.com)

 Fire  Rating

Listed for pre-prepared manufactured doors and certified for retrofitting on existing doors by Underwriters Laboratories for use on fire doors having  up to a three-hour rating.
a.      U.L. Certification: GWVW.R12071 “Accessories for Single-point Locks and Latches and Fire Exit Hardware.” Evaluated in accordance with UL 10B and UL 10C.
b.      U.L. Listing:  GYQS.R11247 “Electrically Controlled Single-point Locks and       Latches.”  Evaluated in accordance with UL 10B and UL 10C.
 c.     Also classified in accordance with Uniform Building Code Standard
        7-2, “Fire Test of Door Assemblies” (1997)

Electronics

FCC Part 15 Class A and CE directive 89/336/EEC compliant

 Environmental Operating
Conditions

Indoor  side: 32°F to 151°F (0°C to 66°C) Outdoor side: -31°F to 151°F (-35°C to 66oC) 0%  to 85% non-condensing humidity at 86oF  (30oC)

 Warranty:

Standard Factory Warranty

Two years

Extended Warranty

Saflok SAFGARD warranty plans  available