MT RFID

Description

Electronic mortise lockset with 1" (25.4mm) throw deadbolt and 5/8" (15.9mm) dead-locking latch bolt

Handing

Factory-handed mortise (left, right, left reverse, right reverse)

ADA Compliant

Lever

Gala

Arc

Troy

Continental

Vintage

Apogee

Elevon

Deadbolt

1" (25.4mm) throw deadbolt and 5/8" (15.9mm) dead-locking latch bolt

Door Thickness

1 ¾" (44.5mm) to 2 ⅛" (53.98mm) for standard product

Weight

Approx. 8.0 lbs with hardware

Housing Construction

Escutcheons: Zinc

Levers: Brass, zinc, or stainless steel

Standard Finishes

Bright chrome, bright brass, satin chrome, satin brass, dark mahogany

Inside Trim Options

Optional äd se or MT inside escutcheon

Standard Backset

2 ¾" (69.9mm) from door edge to lever

ANSI lock case with 1 ¼" or 1" lock front mortise

Locking Options

Options: automatic deadbolt, door ajar, MKO

European lock case mortise (20 x 165 mm) with 20 x 233 mm lock front mortise

Messenger Ready

DAJ mortise (ANSI lock case)

Online

Standard (stand alone) inside escutcheon

Messenger Online

Lock controller board with Messenger capability

Configurations

DAJ mortise (ANSI lock case)

Inside escutcheon equipped with Messenger module

Mobile Key Options

BLE compatible

Standard Lock. Upgradable to BLE by adding BLE connector cable, end cap and BLE module

(BLE)

BLE ready

Upgradable to BLE by BLE module

MT RFID

BLE enabled

End cap with BLE module included, no further upgrades needed

Batteries

Alkaline -

Battery life is up to 2 years

Four AA battery pack

Low battery indicator: alerts staff that batteries need to be changed soon

Lock Operation

Date/Time Stamp

Real-time; date and hours/minutes

Interrogation

Obtain key usage reports from the lock by using a handheld unit at the door, or increase efficiency by performing a remote

Interrogation using Messenger (optional)

Pre-registered

Keys can be made up to ten days in advance without cancelling current or arriving guests

Keycards

Keycard Expiration

Configurable expiration dates; can be automatically set for check out date or manually applied when making key during check in process.

Passage Mode

Set by authorized keycard or Messenger system. Can also be configured to perform an automated/pre-defined passage mode time.

Lockout Mode

Set by authorized keycard or Messenger system

Keycards Accepted

Magstripe, smartcard or Mifare Classic (Quantum RFID and QuantumII) keycards (4 byte NUID)

Feedback

Light indicators in reader

Diagnostics

Light indicators and handheld display

Audit Trail

Up to 4,000 events

Disability Feature

RCU readers interface with automatic power operated doors for special openings

Privacy Override

Emergency keycards

Certifications & Testing

Accessibility Standard

ADA compliant levers (Code of Federal Regulations 28 CFR Part 36 – 1994 "ADA Standards for Accessible Design”)

Certified to be compliant with Grade One performance tests for “ANSI/BHMA A156.13-2005 Standard for Mortise Locks and

BHMA/ANSI

Latches,” and “ANSI/BHMA A156.25-2007 Standard for Electrified Locking Devices.” (Only locks tested and approved by non-

biased third-party test lab are allowed in the “BHMA Certified Products Directory” found at www.buildershardware.com)

Listed for pre-prepared manufactured doors and certified for retrofitting on existing doors by Underwriters Laboratories for use on

fire doors having up to a three-hour rating.

a. U.L. Certification: GWVW.R12071 “Accessories for Single-point Locks and Latches and Fire Exit Hardware.” Evaluated in

Fire Rating

accordance with UL 10B and UL 10C.

b. U.L. Listing: GYQS.R11247 “Electrically Controlled Single-point Locks and Latches.” Evaluated in accordance with UL 10B and

UL 10C.

c. Also classified in accordance with Uniform Building Code Standard 7-2, “Fire Test of Door Assemblies” (1997)

Electronics

FCC Part 15 Class A and CE directive 89/336/EEC compliant

Environmental

Indoor side: 32°F to 151°F (0°C to 66°C)

Outdoor side: -31°F to 151°F (-35°C to 66°C)

Operating Conditions

0% to 85% non-condensing humidity at 86°F (30°C)

Warranty

Standard Factory

Two years

Warranty

Extended Warranty

Saflok SAFGARD Service Plans (Platinum, Gold, Silver)